Assessment of Wood Bio-Concrete Properties Modified with Silane-Siloxane.

Bio-based materials, such as wood bio-concrete (WBC), hold promise in reducing energy consumption and carbon footprint of the construction industry. However, the durability of these materials is not well understood and can be negatively affected by the high water absorption capacity of wood bio-aggregates. In the field of cement composites, for example, silane-siloxane-based water repellent has been used to protect such materials from natural environmental attack. Nevertheless, there is still a limited understanding of various aspects related to this type of treatment, including its performance when applied to the bio-concrete substrate. This research aimed to investigate the influence of silane-siloxane on the rheology and hydration of cementitious paste through isothermal calorimetry and thermogravimetric analysis. Additionally, the impact of silane-siloxane on the physical and mechanical properties of WBCs was examined by conducting tests at fresh state (flow table and entrained air content) and hardened state (compressive strength and capillary water absorption). The composites were produced with a volumetric fraction of 45% of wood shavings while the cement matrix consisted of a combination of cement, rice husk ash, and fly ash. Silane-siloxane was applied in three ways: as coating, incorporated as an admixture, and in a combination of both methods. The results indicated that by incorporating silane in the cementitious pastethe viscosity increased by 40% and the hydration was delayed by approximately 6 h when compared to the reference. In addition, silane improved the compressive strength of WBCs by 24% when incorporated into the mixture, expressively reduced the water sorptivity of WBCs (93%), and was more effective if used as coating.

Orthoplastic surgery: the modern vision of reconstructive surgery in orthopedics.

Abstract: Orthopedic care often calls for the treatment of different trauma-affected tissues, such as nerve, skin, skeletal and soft tissues. Orthoplasty is designed to meet such a need, hence not only does it constitutes a therapeutic method but a real "therapeutic attitude" as well, for the ultimate purpose of dealing with highly complex and multifaceted injuries; by virtue of such features, orthoplasty needs to rely on a truly multidisciplinary and concerted effort, in order to effectively treat highly complex traumatic lesions while prioritizing both anatomical and functional restoration, while avoiding as much as possible demolition surgery, e.g. amputation. Ultimately, the authors point out the extent to which such a technique is valuable in terms of optimizing healthcare resources allocation as well, given that no specific costs to apply orthoplastic surgical interventions, and in light of shorter hospitalization times and operating room occupation.

The Role of Radiomics in Rectal Cancer.

PURPOSE: Radiomics is a promising method for advancing imaging assessment in rectal cancer. This review aims to describe the emerging role of radiomics in the imaging assessment of rectal cancer, including various applications of radiomics based on CT, MRI, or PET/CT. METHODS: We conducted a literature review to highlight the progress of radiomic research to date and the challenges that need to be addressed before radiomics can be implemented clinically. RESULTS: The results suggest that radiomics has the potential to provide valuable information for clinical decision-making in rectal cancer. However, there are still challenges in terms of standardization of imaging protocols, feature extraction, and validation of radiomic models. Despite these challenges, radiomics holds great promise for personalized medicine in rectal cancer, with the potential to improve diagnosis, prognosis, and treatment planning. Further research is needed to validate the clinical utility of radiomics and to establish its role in routine clinical practice. CONCLUSION: Overall, radiomics has emerged as a powerful tool for improving the imaging assessment of rectal cancer, and its potential benefits should not be underestimated.

Co-W Barrier Layers for Metallization of Copper Interconnects: Thermal Performance Analysis.

The back-end-of-line (BEOL) copper interconnect structure has been subjected to downscaling for the last two decades, while the materials used for conforming and assuring its physical integrity during processing have faced significant obstacles as the single-digit nanometer process node is implemented. In particular, the diffusion barrier layer system comprised of Ta/TaN has faced major constraints when it comes to the electrical performance of the smaller Cu lines, and thus alternative formulations have been investigated in recent years, such as Ru-Ta or Co-W alloys. In this work, we assess how PVD (physical vapor deposition) deposited equimolar Co-W films perform when exposed to different vacuum annealing temperatures and how these films compare with the Ta adhesion layer used for Cu seeding in terms of dewetting resistance. The stacks were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) coupled with energy dispersive X-ray spectroscopy (EDX) mapping. The Cu film at the surface of the Cu/Co-W system exhibited grain growth starting at 300 °C, with the formation of abnormally large Cu grains starting at 450 °C. Sheet resistance reached a minimum value of 7.07 × 10-6 Ω/sq for the Cu/Co-W stack and 6.03 × 10-6 Ω/sq for the Cu/Ta stack, both for the samples annealed at 450 °C.

LMI-based consensus of linear multi-agent systems by reduced-order dynamic output feedback.

This work proposes new conditions for consensus of homogeneous multi-agent systems subjected to exogenous disturbances in directed communication graphs by dynamic output feedback protocols. The agents under investigation are described as linear dynamics, and the communication network is such that each agent receives as information only the output of neighbor agents. The synchronization problem is rewritten as an output feedback stabilization without requiring the Laplacian matrix to be diagonalizable. As the main appeal, we propose new necessary and sufficient conditions for the design of dynamic output feedback controllers of arbitrary order - including static output feedback as a particular case - and sufficient Linear Matrix Inequalities (LMIs) for H∞ consensus. Numerical experiments illustrate the effectiveness of the proposed approach.

Seedless Cu Electroplating on Ru-W Thin Films for Metallisation of Advanced Interconnects.

For decades, Ta/TaN has been the industry standard for a diffusion barrier against Cu in interconnect metallisation. The continuous miniaturisation of transistors and interconnects into the nanoscale are pushing conventional materials to their physical limits and creating the need to replace them. Binary metallic systems, such as Ru-W, have attracted considerable attention as possible replacements due to a combination of electrical and diffusion barrier properties and the capability of direct Cu electroplating. The process of Cu electrodeposition on Ru-W is of fundamental importance in order to create thin, continuous, and adherent films for advanced interconnect metallisation. This work investigates the effects of the current density and application method on the electro-crystallisation behaviour of Cu. The film structure, morphology, and chemical composition were assessed by digital microscopy, atomic force microscopy, scanning and transmission electron microscopies, energy-dispersive X-ray spectroscopy, and X-ray diffraction. The results show that it was possible to form a thin Cu film on Ru-W with interfacial continuity for current densities higher than 5 mA·cm-2; however, the substrate regions around large Cu particles remained uncovered. Pulse-reverse current application appears to be more beneficial than direct current as it decreased the average Cu particle size.

The Effect of Ultrasonic Agitation on the Seedless Growth of Cu on Ru-W Thin Films.

Ru attracted considerable attention as a candidate to replace TaN as a diffusion barrier layer for Cu interconnect metallisation. The addition of W improves the diffusion barrier properties of Ru but appears to weaken the adhesion strength between the barrier and Cu and the direct (seedless) electroplatability behaviour. Although Cu can be directly electroplated on near equimolar Ru-W thin films, no complete substrate coverage is obtained. The understanding of Cu electrocrystallisation on Ru−W is essential to develop methods of fabricating thin, continuous, and well adherent films for advanced interconnect metallisation, where Ru−W thin films could be used as diffusion barriers. This work studies the effect of ultrasonic agitation on the growth of Cu films electroplated on Ru−W, namely on the impact on substrate coverage. Film structure, morphology and chemical composition were evaluated by digital and scanning and transmission electron microscopies, and X-ray diffraction. The results show that Cu particles decrease with increasing current density, but when no electrolyte agitation is applied, substrate coverage is incomplete in the central region, with openings around larger Cu particles, regardless of current density. Under ultrasonic agitation, substrate coverage is remarkably improved. An active particle detachment mechanism is proposed as responsible for attaining improved substrate coverage, only possible at intermediate current density. Lower current densities promote growth over nucleation, whereas higher currents result in extensive hydrogen reduction/formation. Ultrasonic agitation also enhances a preferential Cu growth along <111> direction.

Seedless Cu Electroplating on Co-W Thin Films in Low pH Electrolyte: Early Stages of Formation.

The use of Ta/TaN barrier bilayer systems in electronic applications has been ubiquitous over the last decade. Alternative materials such as Co-W or Ru-W alloys have gathered interest as possible replacements due to their conjugation of favourable electrical properties and barrier layer efficiency at reduced thicknesses while enabling seedless Cu electroplating. The microstructure, morphology, and electrical properties of Cu films directly electrodeposited onto Co-W or Ru-W are important to assess, concomitant with their ability to withstand the electroplating baths/conditions. This work investigates the effects of the current application method and pH value of the electroplating solution on the electrocrystallisation behaviour of Cu deposited onto a Co-W barrier layer. The film structure, morphology, and chemical composition were studied by X-ray diffraction, scanning electron microscopy and atomic force microscopy, as well as photoelectron spectroscopy. The results show that the electrolyte solution at pH 1.8 is incapable of creating a compact Cu film over the Co-W layer in either pulsed or direct-current modes. At higher pH, a continuous film is formed. A mechanism is proposed for the nucleation and growth of Cu on Co-W, where a balance between Cu nucleation, growth, and preferential Co dissolution dictates the substrate area coverage and compactness of the electrodeposited films.

Tunable phenotypic variability through an autoregulatory alternative sigma factor circuit.

Genetically identical individuals in bacterial populations can display significant phenotypic variability. This variability can be functional, for example by allowing a fraction of stress prepared cells to survive an otherwise lethal stress. The optimal fraction of stress prepared cells depends on environmental conditions. However, how bacterial populations modulate their level of phenotypic variability remains unclear. Here we show that the alternative sigma factor σV circuit in Bacillus subtilis generates functional phenotypic variability that can be tuned by stress level, environmental history and genetic perturbations. Using single-cell time-lapse microscopy and microfluidics, we find the fraction of cells that immediately activate σV under lysozyme stress depends on stress level and on a transcriptional memory of previous stress. Iteration between model and experiment reveals that this tunability can be explained by the autoregulatory feedback structure of the sigV operon. As predicted by the model, genetic perturbations to the operon also modulate the response variability. The conserved sigma-anti-sigma autoregulation motif is thus a simple mechanism for bacterial populations to modulate their heterogeneity based on their environment.

Towards the Use of Blockchain in Mobile Health Services and Applications.

With the advent of cryptocurrencies and blockchain, the growth and adaptation of cryptographic features and capabilities were quickly extended to new and underexplored areas, such as healthcare. Currently, blockchain is being implemented mainly as a mechanism to secure Electronic Health Records (EHRs). However, new studies have shown that this technology can be a powerful tool in empowering patients to control their own health data, as well for enabling a fool-proof health data history and establishing medical responsibility. Additionally, with the proliferation of mobile health (m-Health) sustained on service-oriented architectures, the adaptation of blockchain mechanisms into m-Health applications creates the possibility for a more decentralized and available healthcare service. Hence, this paper presents a review of the current security best practices for m-Health and the most used and widely known implementations of the blockchain protocol, including blockchain technologies in m-Health. The main goal of this comprehensive review is to further discuss and elaborate on identified open-issues and potential use cases regarding the uses of blockchain in this area. Finally, the paper presents the major findings, challenges and advantages on future blockchain implementations for m-Health services and applications.

A Mechanistic Model of the Regulation of Division Timing by the Circadian Clock in Cyanobacteria.

The cyanobacterium Synechococcus elongatus possesses a circadian clock in the form of a group of proteins whose concentrations and phosphorylation states oscillate with daily periodicity under constant conditions. The circadian clock regulates the cell cycle such that the timing of the cell divisions is biased toward certain times during the circadian period, but the mechanism underlying this phenomenon remains unclear. Here, we propose a mechanism in which a protein limiting for division accumulates at a rate proportional to the cell volume growth and is modulated by the clock. This "modulated rate" model, in which the clock signal is integrated over time to affect division timing, differs fundamentally from the previously proposed "gating" concept, in which the clock is assumed to suppress divisions during a specific time window. We found that although both models can capture the single-cell statistics of division timing in S. elongatus, only the modulated rate model robustly places divisions away from darkness during changes in the environment. Moreover, within the framework of the modulated rate model, existing experiments on S. elongatus are consistent with the simple mechanism that division timing is regulated by the accumulation of a division limiting protein in a phase with genes whose activity peaks at dusk.

Cell size control driven by the circadian clock and environment in cyanobacteria.

How cells maintain their size has been extensively studied under constant conditions. In the wild, however, cells rarely experience constant environments. Here, we examine how the 24-h circadian clock and environmental cycles modulate cell size control and division timings in the cyanobacterium Synechococcus elongatus using single-cell time-lapse microscopy. Under constant light, wild-type cells follow an apparent sizer-like principle. Closer inspection reveals that the clock generates two subpopulations, with cells born in the subjective day following different division rules from cells born in subjective night. A stochastic model explains how this behavior emerges from the interaction of cell size control with the clock. We demonstrate that the clock continuously modulates the probability of cell division throughout day and night, rather than solely applying an on-off gate to division, as previously proposed. Iterating between modeling and experiments, we go on to identify an effective coupling of the division rate to time of day through the combined effects of the environment and the clock on cell division. Under naturally graded light-dark cycles, this coupling narrows the time window of cell divisions and shifts divisions away from when light levels are low and cell growth is reduced. Our analysis allows us to disentangle, and predict the effects of, the complex interactions between the environment, clock, and cell size control.

Integration of Wearable Solutions in AAL Environments with Mobility Support.

The overall demographic profile of current societies point to a significant growth of the elderly people. Associated with the increase of the average hope of life and consequent increase in chronic diseases, there is the need for protection and daily care. Increasing investments in technology, such as Ambient Assisted Living (AAL) solutions, promote the quality of live extending the time people can live in their desired environment. This paper proposes the design, deployment, and real testbed of an e-health wearable monitoring system based on the integration of several AAL tools and platforms for elderly's bio-signals monitoring. This solution includes electrocardiography (ECG), respiration rate, beats per minute, body temperature, and falls detention and notification. The paper also describes, in detail, the real pilot and analyzes some early results concerning the users quality of experience, and the found results are very promising.

Mobile-health: A review of current state in 2015.

Health telematics is a growing up issue that is becoming a major improvement on patient lives, especially in elderly, disabled, and chronically ill. In recent years, information and communication technologies improvements, along with mobile Internet, offering anywhere and anytime connectivity, play a key role on modern healthcare solutions. In this context, mobile health (m-Health) delivers healthcare services, overcoming geographical, temporal, and even organizational barriers. M-Health solutions address emerging problems on health services, including, the increasing number of chronic diseases related to lifestyle, high costs of existing national health services, the need to empower patients and families to self-care and handle their own healthcare, and the need to provide direct access to health services, regardless of time and place. Then, this paper presents a comprehensive review of the state of the art on m-Health services and applications. It surveys the most significant research work and presents a deep analysis of the top and novel m-Health services and applications proposed by industry. A discussion considering the European Union and United States approaches addressing the m-Health paradigm and directives already published is also considered. Open and challenging issues on emerging m-Health solutions are proposed for further works.

Microbial individuality: how single-cell heterogeneity enables population level strategies.

Much of our knowledge of microbial life is only a description of average population behaviours, but modern technologies provide a more inclusive view and reveal that microbes also have individuality. It is now acknowledged that isogenic cell-to-cell heterogeneity is common across organisms and across different biological processes. This heterogeneity can be regulated and functional, rather than just reflecting tolerance to noisy biochemistry. Here, we review recent advances in our understanding of microbial heterogeneity, with an emphasis on the pervasiveness of heterogeneity, the mechanisms that sustain it, and how heterogeneity enables collective function.

Ultrasensitivity in phosphorylation-dephosphorylation cycles with little substrate.

Cellular decision-making is driven by dynamic behaviours, such as the preparations for sunrise enabled by circadian rhythms and the choice of cell fates enabled by positive feedback. Such behaviours are often built upon ultrasensitive responses where a linear change in input generates a sigmoidal change in output. Phosphorylation-dephosphorylation cycles are one means to generate ultrasensitivity. Using bioinformatics, we show that in vivo levels of kinases and phosphatases frequently exceed the levels of their corresponding substrates in budding yeast. This result is in contrast to the conditions often required by zero-order ultrasensitivity, perhaps the most well known means for how such cycles become ultrasensitive. We therefore introduce a mechanism to generate ultrasensitivity when numbers of enzymes are higher than numbers of substrates. Our model combines distributive and non-distributive actions of the enzymes with two-stage binding and concerted allosteric transitions of the substrate. We use analytical and numerical methods to calculate the Hill number of the response. For a substrate with [Formula: see text] phosphosites, we find an upper bound of the Hill number of [Formula: see text], and so even systems with a single phosphosite can be ultrasensitive. Two-stage binding, where an enzyme must first bind to a binding site on the substrate before it can access the substrate's phosphosites, allows the enzymes to sequester the substrate. Such sequestration combined with competition for each phosphosite provides an intuitive explanation for the sigmoidal shifts in levels of phosphorylated substrate. Additionally, we find cases for which the response is not monotonic, but shows instead a peak at intermediate levels of input. Given its generality, we expect the mechanism described by our model to often underlay decision-making circuits in eukaryotic cells.

A new mobile ubiquitous computing application to control obesity: SapoFit.

The objective of this work was the proposal, design, construction and validation of a mobile health system for dietetic monitoring and assessment, called SapoFit. This application may be personalized to keep a daily personal health record of an individual's food intake and daily exercise and to share this with a social network. The initiative is a partnership with SAPO - Portugal Telecom. SapoFit uses Web services architecture, a relatively new model for distributed computing and application integration. SapoFit runs on a range of mobile platforms, and it has been implemented successfully in a range of mobile devices and has been evaluated by over 100 users. Most users strongly agree that SapoFit has an attractive design, the environment is user-friendly and intuitive, and the navigation options are clear.

Trade-offs and constraints in allosteric sensing.

Sensing extracellular changes initiates signal transduction and is the first stage of cellular decision-making. Yet relatively little is known about why one form of sensing biochemistry has been selected over another. To gain insight into this question, we studied the sensing characteristics of one of the biochemically simplest of sensors: the allosteric transcription factor. Such proteins, common in microbes, directly transduce the detection of a sensed molecule to changes in gene regulation. Using the Monod-Wyman-Changeux model, we determined six sensing characteristics--the dynamic range, the Hill number, the intrinsic noise, the information transfer capacity, the static gain, and the mean response time--as a function of the biochemical parameters of individual sensors and of the number of sensors. We found that specifying one characteristic strongly constrains others. For example, a high dynamic range implies a high Hill number and a high capacity, and vice versa. Perhaps surprisingly, these constraints are so strong that most of the space of characteristics is inaccessible given biophysically plausible ranges of parameter values. Within our approximations, we can calculate the probability distribution of the numbers of input molecules that maximizes information transfer and show that a population of one hundred allosteric transcription factors can in principle distinguish between more than four bands of input concentrations. Our results imply that allosteric sensors are unlikely to have been selected for high performance in one sensing characteristic but for a compromise in the performance of many.

[HAV infection in patients with chronic hepatitis C]. / Infezione da HAV in pazienti con epatite cronica HCV-correlata.

AIM: In most cases, hepatitis A virus (HAV) infection causes a self-limiting benign acute hepatitis which confers permanent acquired immunity. However, in patients with pre-existing chronic hepatitis, HAV superinfection can cause acute hepatitis with severe progression leading to a fulminant form or linked to the risk of a rapid deterioration of hepatic function. For such a reason, some Authors recommend anti-HAV vaccination for subjects with HCV-correlated chronic hepatitis before the initiation of peg-Interferon and Ribavirin treatment. Subsequently, the real prevalence of IgG anti-HAV antibodies in patients with HC HCV-related and in healthy subjects from Eastern Sicily has been verified. PATIENTS AND METHODS: In 254 subjects affected by HC HCV-related it has been carried out the research of antibodies IgG and IgM anti HAV. The control group was formed by 685 non hepatopathic subjects, subdivided in range of ages. RESULTS: 97.64% out of the patients affected by HC HCV related exhibit antibodies IgG anti HAV, while only 2.36% of them was negative. The prevalence of infection in the control group has been stratified in relation to different ranges of age of the people taken into consideration. CONCLUSIONS: The results obtained in this study performed in our geographical area, let us to suggest that it is not necessary the anti HAV vaccination during the phase of pre-treatment for HC HCV-related.

Aggressive eosinophilic granuloma of the parietal bone. An immunohystochemical study of Ki-67 expression.

Solitary eosinophilic granuloma (EG) of the skull is a rare lesion, the natural history of which is still to be defined. We report a case of a 26-year-old female who presented with progressive headache and nausea accompanied by a painful firm mass in her left parietal region, which grew very rapidly during the last two weeks before admission. Computed tomography scan showed an osteolytic lesion, which on magnetic resonance imaging appeared hyperintense on both T1- and T2-weighted images, with marked and heterogeneous enhancement after gadolinium administration. Total surgical excision of the lesion was performed and histopathological diagnosis was compatible with eosinophilic granuloma. Immuno-histochemical study of Ki-67 antigen expression was also performed with a labelling index of 10%. In a review of the pertinent literature, we found one case report showing a Ki-67 labelling index of 6.2% in a patient harboring EG of the occipital bone. These two relatively high percentages of proliferative activity suggest a role of local Langerhans'cell proliferation, along with that of inflammatory response, in the aggressive clinical course and rapid expansion observed in some rare cases of solitary eosinophilic granuloma.